Blog

Entries for the 'Manufacturing Automation & Intelligence' Category

Siemens Open Library Marks 1000th Download

The Siemens Open Library marked its 1000th download this week. The free, open source function block library was launched in June 2016 through a partnership between DMC and Siemens. The library aims to be a resource for consistency, usability, and fas...


Commissioning a Siemens G120 VFD with Extended Safety using the Onboard Terminals

DMC recently discovered that there are some unique settings associated with configuring a Siemens G120 Variable Frequency Drive (VFD) with extended safety functionality using the onboard terminals. This blog is meant to be a guide for this type of co...


Beckhoff TwinCAT3 Scope

For anyone debugging a program, a scope can be an extremely efficient tool for determining the cause of an issue. A scope allows you to monitor a variable (or multiple) in real time, which is a great way of viewing and debugging specific pa...


Creating New Projects and Adding Hardware Modules: B&R Automation Studio Blog Series, Part One

Whether you are starting from scratch or adding functionality to an existing setup, B&R Automation Studio makes it easy to add and configure hardware. This article is part of a multi-part series that will guide you through the required steps t...


DMC to Keynote Axis NJ 2016 Automation Expo

DMC is proud to present at the Axis NJ 2016 Automation Expo on Thursday, October 27, 2016. Project Director Jon Carson will lead the keynote address on the topic of cyber security at 12:00 p.m. The Axis NJ Automation Expo is an annual event h...


How to Use MatrikonOPC Server with a Siemens PLC

MatrikonOPC Server allows you to connect OPC clients like HMIs, SCADA systems, and other custom applications to a wide range of Siemens PLCs (S7-200, S7-300, S7-1500, etc.) via Ethernet.  This blog shows you how to configure a Siemens S7-300 ...


Connecting to Legacy Telemecanique XBT Terminals

As legacy hardware begins to fail, support can be difficult for a variety of reasons - not the least of which is the deprecation of programming software and debugging tools. I recently helped a customer restore the program to an old Telemecanique (no...


DMC on Tour: Modernization Made Easy on the E&M New Stuff Road Show

Jimmy Condon and I joined E&M on the 2016 edition of their annual New Stuff Road Show to help Siemens showcase their new Modernization Made Easy initiative that was launched this year. The two-week tour, which stretched from Sacramento to San ...


Dissecting the Siemens Open Library: Configuring Multiple Items On a Faceplate Using a UDT

The Siemens Open Library is a great resource that includes many commonly used Function Blocks and Faceplates. However, every project is different and customer requirements sometimes necessitate changes or the creation of new ...


Industrial Security: 4 Ways to Keep Your Factory Safe from Cyber Attacks

Two years ago, I had the opportunity to meet a high-ranking US Senator. One thing that stuck with me was how seriously he took Chinese cyber espionage. Was it really possible that our phones could spy on us, even when powered down, unless the battery...


Page 17 of 33First   Previous   12  13  14  15  16  [17]  18  19  20  21  Next   Last   
Page 17 of 33