Blog

Entries for the 'Siemens PLC' Category

PLC Analog IO Troubleshooting Tips

When commissioning or troubleshooting PLC inputs and outputs (IO), the analog signals are often the most difficult. First, analog IO almost always has to be scaled to convert the raw signal to useful process values. Also, there are many wiring and ex...


"Indirect Addressing" in Step 7 Basic v10.5 SP2

For those of us who appreciate and harness the power of indirect addressing in Siemens S7 300 and 400 level PLCs, we were sad to hear that this functionality was not supported in the same way for the new Step 7 Basic software for S7-1200 PLCs. As ...


Siemens S7-1200 PLC communicates through Sinaut MD720-3 cellular modem

Many consumers, including myself, have tapped into the ever-growing functionality of mobile internet. Many people leverage this infrastructure for their mobile phone. Others are beginning to use WiMAX connections for their PCs. Not to be out-done, PL...


Redundant Control Systems: Siemens S7 400H Series PLC and WinCC

There are certain control systems, such as in nuclear power plants and airplanes, that cannot be disabled or shut down, even momentarily, because of the threat to people’s lives. In these applications, a redundant control system must be in plac...


Communication between Siemens HMIs and non-Siemens controllers

Ever wanted to use those very nice looking Siemens touchpad HMIs with a third party controller Siemens doesn't officially support? On a recent project I was presented with the following scenario: a customer already had several Siemens touch-scree...


After working on several projects with Siemens S7-300 Safety PLCs, I was given the opportunity to contribute to an article for ControlDesign.com that presents cases for and against replacing hardware components with software solutions in machine cont...


Remote IO Configuration for Simatic 505 - As Easy As 3-4-5...

While commissioning the automation controls for a manufacturing line, I acquired some tips and tricks for configuring a Profibus network on a Simatac 505 (formerly known as a TI 505). Using 505 Workshop version 4.32 development environment from Fastr...


Siemens Simatic S7-300 - Retaining Values When Downloading a Datablock

A simple yet common problem when programming a Siemens Simatic S7-300 PLC is losing the data already stored in the PLC after downloading an updated data block. If you are simply adding items to the end of a flat data block (not adding items to a u...


Siemens S7 PLC Troubleshooting

Once you are familiar with their capabilities and methodologies, Siemens PLCs have the potential to make controls programming quicker and easier than ever. With support for function blocks, text-based programming, libraries, and user defined types, S...


Kevin Johnson of ILF Visits DMC for the Week

During this past week, DMC had the opportunity to work with Kevin Johnson of ILF Technologies at the DMC office. ILF, located in Romeoville, IL, produces web finishing products for the printing and converting industries. The machine we are current...


Page 14 of 15First   Previous   6  7  8  9  10  11  12  13  [14]  15  Next   Last   
Page 14 of 15