Categories

Entries for the 'Mitsubishi' Category

How to Upload a Project from a MELSEC F-Series PLC
Becca Stussman

How to Upload a Project from a MELSEC F-Series PLC

Need to upload a project from a MELSEC F-series PLC? You're in luck! This tutorial explains how to upload the software on a MELSEC F-series PLC using GX Developer, the MELSOFT developing platform for this line of controllers.    1. Connect the PLC to your PC. MELSEC F-Series PLCs use a SC-09 RS232 to RS422 adapter cable, which can be purchased from many places, including on Amazon here: https://www.amazon.com/gp/product/B007MYZJQW/ref=oh_aui_detailpage_o04_...

Continue reading →


DMC Earns InduSoft Certified Systems Integrator Status
Nicklas Thystrup

DMC Earns InduSoft Certified Systems Integrator Status

DMC is proud to announce our status as an InduSoft Certified Systems Integrator. After years of experience using Wonderware's Indusoft on projects, we have become the only Certified Systems Integrator in Chicago. InduSoft’s Certified Integrator Program is an incentive driven program open to all System Integrators who recommend and develop automation solutions utilizing InduSoft Web Studio software. The program allows DMC access to technical training and...

Continue reading →


Indusoft Tips and Tricks
Nikhil Holay

Indusoft Tips and Tricks

Indusoft is an HMI/SCADA platform that can be used with a variety of different PLCs. At DMC, we’ve used Indusoft with several PLC platforms, including Beckhoff, Omron, and Mitsubishi. Below, I’ve outlined a few tips and tricks that I’ve used to accelerate Indusoft development.   Indusoft Tip 1: Refer to the PLC Make sure that your driver sheet I/O addresses refer to something in the PLC. If you are using symbolic tags, the tag must exist in the PLC or Indusoft wil...

Continue reading →


Categories