Blog

Entries for the 'Manufacturing Automation & Intelligence' Category

DMC Joins the Siemens MOM Expertise Alliance Center

Sam Weber and I recently participated in two meetings for the Siemens MOM Expertise Alliance Center (MEAC). Sam and I spent two days discussing the future of Manufacturing Execution Systems and Manufacturing Operations Management (MES and MOM) with t...


Motion Control Solutions with Technology Objects in Siemens TIA Portal

This article goes through setting up and using the Siemens S120 drive inside TIA Portal after configuration in STARTER. While several other Siemens drives can be started with Siemens Startdrive (G120, G120C, G120D, and G120P), performing a hardware c...


Commissioning Siemens G120 Drives with Startdrive in TIA Portal

The built-in drive commissioning features in TIA Portal make it very simple to commission a Siemens G120 drive with a Siemens S7 PLC without the need for any stand-alone software. Drives can be commissioned quickly and easily, and afterwards all driv...


SIMATIC IT Line Monitoring Tool for Overall Equipment Effectiveness

DMC has recently been working closely with Siemens in expanding opportunities to utilize their Manufacturing Execution Systems and Manufacturing Operations Management platform, SIMATIC IT. One area we've pursued is development of a Line Monitorin...


Datalogging From a Siemens PLC to LabVIEW: Easier Than You Think

Have you ever been disappointed in the data logging options available on your Basic panel? Ever wished it were easier to set up logging directly to a database? Or perhaps you've wanted to set up some simple simulation or test sequences without mo...


Siemens WinCC OA - The Open Architecture SCADA Package

When asked if we work with a particular technology here at DMC, my answer is always "yes". PLC, Embedded, Test and Measurement, Business Logic: we do it all and more. WinCC OA (OA) is the spiritual analogue to that philosophy in SCADA fo...


Hitting the Ground Running…to China

As we enter the Christmas season, I can’t help but think back to this time last year. I was less than three months away from graduating college and faced with a big decision. It was only a few days before Christmas Eve, that I decided to start ...


B&R Automation Studio: Troubleshoot Hardware Using Network Command Trace

I recently had to troubleshoot an issue in which my servo drive was not responding to my PLC commands - as expected. In order to see the interaction between the PLC and the servo drive, I used the Network Command Trace.   Learn more about ...


DMC Congratulates LabVIEW Certified Architects and Developers

As a National Instruments Alliance Member, DMC takes pride in delivering top-notch solutions for all NI related projects. We take our education and the custom solutions we deliver our clients seriously. We have worked particularly hard to maintain a ...


Nobel Committee Recognizes Inventors of Blue LED

I want to congratulate the Nobel Committee for recognizing the inventors of the Blue LED - a truly transformative technology. As an engineer working with machine vision systems I have been using LED lighting longer than most people. LEDs are great fo...


Page 21 of 32First   Previous   16  17  18  19  20  [21]  22  23  24  25  Next   Last   
Page 21 of 32