Blog

Entries for the 'Manufacturing Automation & Intelligence' Category

DMC Recognized as a SIMATIC WinCC Specialist

As a Siemens Solution Partner, DMC is proud to have recently been recognized as a Siemens WinCC Specialist. WinCC Specialists are qualified experts who can implement complex SCADA projects using Siemens’ best practices. This prestigious acknowl...


DMC to Present at Siemens Oil and Gas Innovations Conference

Siemens is hosting the 2015 Siemens Oil & Gas Innovations Conference at Minute Maid Park in Houston, Texas from April 22-April 23. As a Siemens Solution Partner and with a new office opening in Houston, Texas later this year, I am honored to repr...


Schneider MDrive Motor Integration with Siemens Programming

I have found little information for commissioning a Schneider Electric Lexium MDrive Stepper Motor and integrating it into a Siemens solution, so I decided to write about how I did it. Commissioning the MDrive Stepper Motor with the Schneider TCP ...


DMC Joins the Siemens MOM Expertise Alliance Center

Sam Weber and I recently participated in two meetings for the Siemens MOM Expertise Alliance Center (MEAC). Sam and I spent two days discussing the future of Manufacturing Execution Systems and Manufacturing Operations Management (MES and MOM) with t...


Motion Control Solutions with Technology Objects in Siemens TIA Portal

This article goes through setting up and using the Siemens S120 drive inside TIA Portal after configuration in STARTER. While several other Siemens drives can be started with Siemens Startdrive (G120, G120C, G120D, and G120P), performing a hardware c...


Commissioning Siemens G120 Drives with Startdrive in TIA Portal

The built-in drive commissioning features in TIA Portal make it very simple to commission a Siemens G120 drive with a Siemens S7 PLC without the need for any stand-alone software. Drives can be commissioned quickly and easily, and afterwards all driv...


SIMATIC IT Line Monitoring Tool for Overall Equipment Effectiveness

DMC has recently been working closely with Siemens in expanding opportunities to utilize their Manufacturing Execution Systems and Manufacturing Operations Management platform, SIMATIC IT. One area we've pursued is development of a Line Monitorin...


Datalogging From a Siemens PLC to LabVIEW: Easier Than You Think

Have you ever been disappointed in the data logging options available on your Basic panel? Ever wished it were easier to set up logging directly to a database? Or perhaps you've wanted to set up some simple simulation or test sequences without mo...


Siemens WinCC OA - The Open Architecture SCADA Package

When asked if we work with a particular technology here at DMC, my answer is always "yes". PLC, Embedded, Test and Measurement, Business Logic: we do it all and more. WinCC OA (OA) is the spiritual analogue to that philosophy in SCADA fo...


Hitting the Ground Running…to China

As we enter the Christmas season, I can’t help but think back to this time last year. I was less than three months away from graduating college and faced with a big decision. It was only a few days before Christmas Eve, that I decided to start ...


Page 22 of 33First   Previous   17  18  19  20  21  [22]  23  24  25  26  Next   Last   
Page 22 of 33