Categories

All

Services

Industries

Case Studies

Page 5 of 17First   Previous   1  2  3  4  [5]  6  7  8  9  10  Next   Last   

Email Infrastructure Migration to Office 365

Posted in Microsoft Azure Cloud Solutions and Services, Microsoft Consulting Services, Office 365, Office 365 Migration

DMC completed the migration of this client’s on-premise Exchange 2010 server to the Microsoft Office 365 platform. This project included the migration of 27 mailboxes and integrated configuration of their on-premise scanners with Office 365 email.

Continue reading →

High Speed Cutting with Fanuc Delta Robots

Posted in Beckhoff and TwinCAT 3 Programming, Food and Beverage, Manufacturing Automation and Intelligence, PLC Programming, Robotics

DMC worked with an established bread company to commission three Fanuc delta robots for automated bread scoring.

Continue reading →

NI DAQ System Modernization

Posted in LabVIEW Programming, Test and Measurement, Test and Measurement Automation

The client currently operates a test system for evaluating the performance of electric motors and wanted to replace obsolete hardware. DMC modernized the client’s existing test & measurement software to allow for the installation of more current hardware, provide additional data logging, and simplify the process for adding new features in the future. It was important to the customer that the user interface remain the same to minimize the time operators spend learning the new system.

Continue reading →

Microsoft Communication Suite Migration to Office 365

Posted in Microsoft Azure Cloud Solutions and Services, Microsoft Consulting Services, Office 365, Office 365 Migration

DMC’s consulting services team led the migration from Exchange 2010 to Office 365 for Kenton County Library. The client wanted to migrate its 200+ mailboxes from an on-premise email and Lync server infrastructure to the Microsoft Office 365 cloud. DMC addressed some unique technical challenges and implemented the solution smoothly and successfully.

Continue reading →

Low Power Medical Device

Posted in Circuit Design, Custom Software and Hardware Development, Embedded Development and Embedded Programming, Embedded Systems, Pharmaceutical & Medical

DMC designed an electronic gauge with extremely low power consumption for a client in the medical industry.

Continue reading →

Embedded Design and Development Consulting

Posted in Circuit Design, Consumer Goods, Custom Software and Hardware Development, Embedded Development and Embedded Programming, Embedded Systems

A client in the water industry wanted to add functionality to an existing product in order to expand into additional markets. They reached out to DMC to analyze their existing design as well as competing products and make recommendations on a development path for future products and features.

Continue reading →

Bluetooth Connectivity for Consumer Product Lines

Posted in Consumer Goods, Custom Software and Hardware Development, Embedded Development and Embedded Programming, Embedded Systems, Internet of Things (IoT)

DMC helped several consumer products companies integrate bluetooth connectivity into their existing product lines by leveraging embedded development and programming experience to develop a proof-of-concept.

Continue reading →

Wireless Filtration Monitoring System

Posted in Custom Applications, Embedded Development and Embedded Programming, Embedded Systems, Internet of Things (IoT), Microsoft Azure Cloud Solutions and Services, Microsoft Consulting Services

A client in the water treatment industry hired DMC to design a system enabling operators to manage water filters across multiple locations. DMC developed connectivity to collect data at each site and monitor the network from a central hub.

Continue reading →

Factory-wide MES Data Collection System

Posted in Business Intelligence, Custom Software and Hardware Development, Food and Beverage, Manufacturing Automation and Intelligence, Manufacturing Execution Systems, Microsoft Consulting Services, SQL Server BI

DMC implemented an extensive data collection system for a client in the confectionary industry. The resulting system allows the client a closer lens into their processes with automated data aggregation.  

Continue reading →

Gas Compression System for Enhanced Oil Recovery

Posted in Allen Bradley PLC Programming, HMI and SCADA Systems, Manufacturing Automation and Intelligence, Oil and Gas, PLC Programming, Rockwell FactoryTalk

DMC worked with a leader in the gas compression industry to expand a custom gas compression system for enhanced oil recovery. The existing PLC program and I/O was extended to increase total capacity by bringing another compressor online.  

Continue reading →

Automated Fuel Pumping System

Posted in Energy and Utilities, HMI and SCADA Systems, Oil and Gas, Other PLC Platforms

DMC programmed a fuel management system that feeds generators to provide emergency back-up power to a mission critical 24-7 building. The end result was an automated fuel pumping system to keep the generators running as long as needed. 

Continue reading →

MES Recipe Management and SCADA Control System

Posted in Allen Bradley PLC Programming, Chemical, HMI and SCADA Systems, Manufacturing Automation and Intelligence, Manufacturing Execution Systems, PLC Programming, Wonderware Programming

DMC implemented a Wonderware SCADA and MES system for several chemical manufacturing lines. The system features a centralized recipe management system. The end result was a consistent product with reduced quality control issues.

Continue reading →

FactoryTalk Metrics OEE Reporting and Production Monitoring

Posted in Allen Bradley PLC Programming, Automotive, Business Intelligence, HMI and SCADA Systems, Manufacturing Automation and Intelligence, Manufacturing Execution Systems, Microsoft Consulting Services, PLC Programming, Rockwell FactoryTalk, SQL Server BI

DMC implemented a Rockwell FactoryTalk Metrics production monitoring and reporting system for an automotive supplier. FactoryTalk Metrics was configured to interface with the Allen-Bradley PLCs that control their production lines. DMC used SQL Server and SQL Server Reporting Services (SSRS) to customize data collections and reporting to fit the client challenges and needs. The end solution included real-time emailing of reports to key personnel.

Continue reading →

Expandable Process Control System with WinCC OA

Posted in Chemical, HMI and SCADA Systems, Manufacturing Automation and Intelligence, Pharmaceutical & Medical, PLC Programming, Siemens S7 PLC Programming, WinCC Open Architecture Development

DMC was hired by a company in the medical devices field who was creating a new fluid process mixing and bottling line. DMC created an expandable process control system with CFR 21 Part 11 compliant audit trail capability.

Continue reading →

Sales Process Automation with Microsoft CRM and SharePoint

Posted in Business Intelligence, CRM Online, Custom Applications, Dashboards, Document Management, Microsoft Consulting Services, Office 365, SharePoint, Team Collaboration, Workflow

Stone Technologies, Inc. is a national Systems Integrator based in St. Louis, MO with offices in 16 states. Stone focuses on project delivery and provides manufacturing consulting and industrial automation services, including process control and manufacturing execution system (MES/MOM) design, software development, and commissioning. DMC’s Consulting Services team was asked to create a cloud / on-premises hybrid solution to automate the integration of Microsoft Dynamics CRM Online sales opportunity...

Continue reading →

Page 5 of 17First   Previous   1  2  3  4  [5]  6  7  8  9  10  Next   Last   

Categories

All

Services

Industries