Blog

Entries for the 'Test and Measurement Automation' Category

Taming Clock Drift With NI-Sync

Some data acquisition applications using LabVIEW require an ultimately stable clock reference. In these cases there are a number of options, such as GPS, for generating a clock reference that is more accurate than your DAQ board can attain on its own...


National Instruments LabVIEW Remote Panel Bug

Although we use many different technologies and software packages at DMC, we have a great amount of experience with National Instruments LabVIEW. We currently have four Certified Architects and another seven Certified Developers. Lately, we've...


Battery Management System (BMS) Testing Article Featured on Evaluation Engineering

An article co-authored by DMC Senior Project Engineer, Brent Hoerman, has been featured on the Evaluation Engineering website and will be published in the April print edition. Brent wrote the article after completing a project with Pickering Interfac...


Creating a Modular LabVIEW Application (Part 3 of 3): Creating Universal Control

This is the final entry in a 3 part series for creating modular, scalable LabVIEW programs. Feel free to visit the first two entries, “Creating a Modular LabVIEW Application (Part 1 of 3): Creating an Expandable Data Format” and “Cr...


Introducing LabVIEW Object Oriented Programming to your Toolbox

The concept of LabVIEW Object Oriented Programming (LVOOP) has been around for a number of years now, but has consistently been one of those areas that seemed to have to high of a learning curve to justify learning “just because”. Luckily...


Creating a Modular LabVIEW Application (Part 2 of 3): Eliminating VI Dependencies

This is the second part of a 3 part series on creating modular, scalable LabVIEW applications. If you haven’t, feel free to read the first section, “Creating a Modular LabVIEW Application (Part 1 of 3): Creating an Expandable Data Format&...


Modular LabVIEW architecture

Many of the LabVIEW applications that DMC develops are based on our internally developed state machine architecture. This architecture has a proven record of allowing us to create flexible, robust, and easy to maintain applications. One of our cli...


Creating a Modular LabVIEW Application (Part 1 of 3): Creating an Expandable Data Format

One of LabVIEW’s strongest points is that it is a very “approachable” programming languages. Since it is a graphical language, it is relatively easy for a “non-programmer” to get a quick, simple, stand-alone program up a...


What is a "National Instruments Certified LabVIEW Architect" ?

... and why should I care if my LabVIEW integrator is properly certified? In most cases, the reason you are considering partnering with DMC to complete a LabVIEW project is because you don't have in-house personnel proficient in LabVIEW develo...


New White Paper: Electric Vehicle Battery Pack Testing

DMC has been involved in quite a few battery testing projects lately. We thought it would be helpful to assemble a compilation of some of the general things we have learned into a new white paper.... "Electric Vehicle Battery Pack Testing in ...


Page 16 of 19First   Previous   10  11  12  13  14  15  [16]  17  18  19  Next   Last   
Page 16 of 19