Precision Time Protocol (PTP) allows many devices on the same network to maintain extremely precise times in relation to each other. However, different time standards and a device's interpretation of timing signals can cause issues. There are ...
I recently worked on a project that involved precisely synchronizing multiple devices over a network. This included an NI PXIe, an NI cRIO, and a Rockwell PLC, all connected over a network switch to a Microchip SyncServer. Our team was able to succes...
Time synchronization in automation and DAQ systems is an important tool to ensure all moving parts in a system are synced together. Yet, setting up a time synchronized system is not always a trivial task. Depending on the network switch and its ...
DMC is honored to announce a strategic partnership with Battery Innovation Center, a leader in Energy Storage Research and Development. In this partnership, DMC will integrate PAtools software into BIC’s automated battery test systems, enhancin...
Join DMC at the GDevCon North America conference at the Buffalo Rose in Golden, Colorado from July 23-25. GDevCon's goal is to help LabVIEW developers in teams learn and level up together. In addition to attending the event, we are p...
NI Connect 2024 was a highlight event this year for the Test and Measurement industry that brought together major thought leaders to share insights, forge connections, and celebrate innovation. Let’s dive into the key takeaways! S...
Join DMC at NI Connect 2024, May 20-22 at The Austin Convention Center in Austin, Texas. NI Connect is a technical conference hosted by National Instruments (NI). The annual event features technical sessions, keynotes, networki...
For those of us not fortunate enough to edit code in LabVIEW 2023 Q3 +, where zooming in and out of block diagrams is finally natively supported, we have to get clever. Below are a few unconventional tips on how to zoom in LabVIEW ...
In Test and Measurement Automation projects, we often have to make numerous, quick measurements for test points on a device being tested, which we make with multiplexers. For a recent project, we needed to measure multiple AC voltages on a Mobil...
DMC's Test and Measurement Automation team got into the holiday spirit and put their LabVIEW Icon Editor skills to the test with an ornament-making event! LabVIEW has an icon editor, typically used for labeling code, but the possibilities of...