Sometimes, it's difficult to articulate exactly what type of work DMC does day to day. For example, in a career fair setting a DMC employee might only have a few minutes to describe our projects to a candidate. It quickly became apparent to us th...
When choosing a piece of hardware, you will likely be confronted with many options from different vendors for what interface (PCI, PXI, USB, Serial/GPIB, LXI) that device will use to communicate with your software controller, so how do you choose? ...
For a recent DMC project I had the pleasure of working with Pickering Interfaces, a well-known international PXI hardware vendor, to supply an off-the-shelf PXI card which can simulate 6 chemical battery cells. Since such a product did not exist at t...
We had a great time exhibiting at the 2009 National Instruments Technical Symposium on October 20th. Representing DMC, I was joined by two of our LabVIEW certified Architects, Jody Koplo and Leon Grossman, as well as our Technical Director Ken Brey. ...
Recently, a colleague here at DMC was looking for a quick method of converting a drive-based path to its corresponding universal path name. Basically, he is writing a tool in LabVIEW that will run on computers that may have the same network drive map...
Recently one of DMC's customers, LTS Scale, issued a press release describing the first fork-truck-mounted dimensional weighing system. DMC worked closely with this customer from the first stages of research through the development of the system ...
Over the course of NI Week in Austin, National Instruments gradually introduced and demonstrated the new features that are being implemented in the LabVIEW 2009 release. Many were logical steps forward in hardware and software development, some were ...
Christian Loew, a Systems Engineer at NI, has developed an open source utility for deploying rtexe's to a variety of Real-Time and Touch Panel targets. He has written a detailed white paper on how to use his application and the areas where users ...
Lately, DMC has been working on several "Green Engineering" and "Clean Energy" programs to develop test systems for clients developing or evaluating Battery and Fuel Cell Power Systems. Along the way, we have run into some fair...
Every summer, National Instruments holds the NIWeek conference in their home town of Austin TX. This year, DMC has three of us attending: Jesse Batsche, Eric Nielsen, and myself. Monday was “Alliance Day”, tailored to NI Alliance Membe...