Ken Brey

11/16/2010

1 Comments

A version of VNC Server is available which works on Siemens MP277 and other Siemens displays that are WinCE 5.0 or higher. The open source project can be found here: http://sourceforge.net/projects/efonvnc/ Steps 1. The MP277 uses the ARM ...

Nick Shea

02/26/2010

5 Comments

Many consumers, including myself, have tapped into the ever-growing functionality of mobile internet. Many people leverage this infrastructure for their mobile phone. Others are beginning to use WiMAX connections for their PCs. Not to be out-done, PL...

Cesar Pena

12/17/2009

0 Comments

There are certain control systems, such as in nuclear power plants and airplanes, that cannot be disabled or shut down, even momentarily, because of the threat to people’s lives. In these applications, a redundant control system must be in plac...

Jon Carson

11/17/2009

0 Comments

Ever wanted to use those very nice looking Siemens touchpad HMIs with a third party controller Siemens doesn't officially support? On a recent project I was presented with the following scenario: a customer already had several Siemens touch-scree...

Danny Budzinski

10/02/2009

0 Comments

I was working with Vijeo Designer 5.0 on a recent project and, overall, found it rather enjoyable to work with. Vijeo Designer is the Schneider Electric / Telemecanique programming software for the Magelis XBT-GT HMI's along with several other SC...

Boris Cherkasskiy

09/11/2009

1 Comments

If you have never heard about Genesis32 SCADA package from Iconics, this is the right time to learn more about it before we continue. I shall wait right here... Good, now you know what I am talking about. We'll talk about GraphWorX32, this ...

Tim Jager

06/24/2009

1 Comments

I am proud to announce that DMC has achieved Certified Wonderware Integrator Status. To achieve Certified System Integrator Status, DMC has fulfilled the following certification requirements of the Wonderware SI Ecosystem Program: Two or more d...

Tim Jager

06/10/2009

1 Comments

DMC is proud to announce that Jody Koplo and Ken Brey have each passed Wonderware certifications exams. Jody successfully passed the InTouch 10.0 Exam and Ken Brey passed the InSQL Historian Exam. Prior to taking the test, Ken had completed severa...

Nick Shea

05/21/2009

0 Comments

Yesterday, I attended the 2009 Energy Management Seminar presented by Schneider Electric. The seminar focused on strategies and technologies to monitor and improve energy efficiency. The keynote speaker, Peter Garforth, made a compelling case for ...