DMC is excited to present two presentations at the PCC Okterberfest: Tap Into Technology event taking place on Thursday, September 27th, 2018 at the Washington County Fair Park & Conference Center in West Bend, WI. Expect a day of se...
DMC recently hosted Daymon Thompson and Mike Rauch of Beckhoff Automation who shared with DMC the latest updates on the TwinCAT (The Windows Control and Automation Technology) platform. TwinCAT is a software system from Beckhoff that can turn almo...
Earlier this year, DMC attended a training course on the new TwinCAT HMI at Beckhoff’s U.S. headquarters in Savage, MN. We were impressed by the flexibility and convenience offered by the platform and have already enjoyed using it on projects. ...
Siemen’s TIA Portal provides quite a few useful features that make it very easy to update and maintain code. Updating projects from one version to the next is as easy as opening the project in the newer version of Portal. However, there ar...
I recently worked on a project that required the use of data logging. However, the formatting of Siemen's data logging was not ideal for this implementation. So, I made my own version of data logging using Visual Basic scripts on my Comfort ...
So, you either had a system that was working and then a red light showed up, or you bought a used PLC and the fault light showed up. Here's how to fix the fault light. If the "BATT" Light is Red You should replace the ...
The 2018 Siemens Automation Summit was held last month at the JW Marriott Beach Resort on Marco Island, Florida. Twelve DMC representatives from around the country met to attend the annual conference from June 25-28. Fresh off ...
Your code compiles, hardware config is all set, but you can't get rid of the red lights on the 400H system. Check the following before pulling out your soldering iron and green LEDs. 1. Are the rack switches correct? If you ...
DMC has a lot of Siemens Certified Engineers. In fact, we have the most in the United States. As we continue to grow, so does our number of Siemens experts. After a recent Siemens Global Certification exam in the Chicago suburbs, we are proud to...
Need to upload a project from a MELSEC F-series PLC? You're in luck! This tutorial explains how to upload the software on a MELSEC F-series PLC using GX Developer, the MELSOFT developing platform for this line of controllers. &...