Dan Freve

07/10/2009

0 Comments

Recently I've had the opportunity to do some embedded development using the .NET Micro Framework platform. The .NET Micro Framework is a light-weight version of the full .NET framework that can be ported to run on a variety of processors, includi...

Jody Koplo

07/06/2009

3 Comments

I recently finished a project that checked for gas leaks on a mission critical system. Any leaks needed to be diagnosed and discovered as quickly as possible. Our solution also had to be mobile and easily carted around the facility. To develop a s...

Tim Jager

06/24/2009

1 Comments

I am proud to announce that DMC has achieved Certified Wonderware Integrator Status. To achieve Certified System Integrator Status, DMC has fulfilled the following certification requirements of the Wonderware SI Ecosystem Program: Two or more d...

Darren Jones

06/22/2009

0 Comments

DMC demonstrated our LabVIEW expertise again by receiving seven new certifications, including three Architect Certifications, putting DMC among the highest level of LabVIEW Architects in the country. With the additional Developer Certifications, DMC ...

Matt Puskala

06/19/2009

0 Comments

You've finished and double checked your schematic, all the footprints have been loaded or created, and you've laid out all of your components on your board. Now it is time to route the traces. Traditionally, board designers route traces by...

Tim Jager

06/10/2009

1 Comments

DMC is proud to announce that Jody Koplo and Ken Brey have each passed Wonderware certifications exams. Jody successfully passed the InTouch 10.0 Exam and Ken Brey passed the InSQL Historian Exam. Prior to taking the test, Ken had completed severa...

Brent Hoerman

06/05/2009

4 Comments

On June 2, 2009, I attended National Instruments' RF and Communications Technology Forum held in Schaumberg, IL. It was a very interesting, quick moving 4 hours.  Highlights Watching a demo of using voice to text with LabVIEW qui...

Danny Budzinski

06/04/2009

2 Comments

A few weeks ago, I was coerced by my girlfriend into buying one of those silly "floor cleaning robots." Yes, I mean a Roomba. I was skeptical, but I sat down and did some research.  Little did I know that while I had been slaving aw...

Darren Jones

05/26/2009

0 Comments

Underscoring DMC's successes with National Instruments and the US Department of Energy, the Fermilab newsletter from NI featured DMC's work in electrochemical storage test systems at the Argonne National Laboratory. "Internationally r...

Kristie Simon Shea

05/22/2009

0 Comments

During this past week, DMC had the opportunity to work with Kevin Johnson of ILF Technologies at the DMC office. ILF, located in Romeoville, IL, produces web finishing products for the printing and converting industries. The machine we are current...