Categories

Entries for 'Becca Stussman'

DMC Sees Tina Fey, Amy Poehler Perform Improv Show at Carnegie Hall
Becca Stussman

DMC Sees Tina Fey, Amy Poehler Perform Improv Show at Carnegie Hall

Last week, DMC saw an absolutely star-studded rendition of ASSSSCAT, the world’s longest-running improv show. The performance, which took place at the iconic Carnegie Hall, involved Tina Fey as the monologist and Amy Poehler, Matt Walsh, Ian Roberts, Matt Besser, Horatio Sanz, and Rachel Dratch as improvisers. The format of the show started with a suggestion from the audience. Then Tina Fey would ad-lib a monologue based off of that suggestion. After her monologue, the rest of the cast ...

Continue reading →


How to Upload a Project from a MELSEC F-Series PLC
Becca Stussman

How to Upload a Project from a MELSEC F-Series PLC

Need to upload a project from a MELSEC F-series PLC? You're in luck! This tutorial explains how to upload the software on a MELSEC F-series PLC using GX Developer, the MELSOFT developing platform for this line of controllers.    1. Connect the PLC to your PC. MELSEC F-Series PLCs use a SC-09 RS232 to RS422 adapter cable, which can be purchased from many places, including on Amazon here: https://www.amazon.com/gp/product/B007MYZJQW/ref=oh_aui_detailpage_o04_...

Continue reading →


Using an S7-1500 PLC as a Modbus RTU Slave
Becca Stussman

Using an S7-1500 PLC as a Modbus RTU Slave

Need to make data available from your 1500 PLC to a Modbus RTU master? As long as you have a Modbus RTU capable serial communications adapter module, setting up a Modbus RTU server is pretty simple. Communications Adapter Since S7-1500 PLCs don't typically come with onboard serial communication ability, you'll need to use an adapter module that supports the Modbus RTU slave protocol, with a port interface that meets your system connection requirements. See below for two ...

Continue reading →


3 Essential Steps Before Deploying a Siemens PLC Project
Becca Stussman

3 Essential Steps Before Deploying a Siemens PLC Project

DMC regularly implements successful project solutions using Siemens PLCs. Along the way, we've learned a few quick tips that can save hours or even days of time in post-project support. If you're working on a project using a Siemens 1200 or 1500 PLC or a WinCC HMI Panel, make sure to consider these three steps below. Each one takes less than five minutes, but can help you avoid undesired post-project consequences and can make testing much easier.  Switch Your S7 PLC to Run o...

Continue reading →


Tips and Tricks for Upgrading your NI Compact Fieldpoint to CompactDAQ
Becca Stussman

Tips and Tricks for Upgrading your NI Compact Fieldpoint to CompactDAQ

National Instruments’ CompactDAQ series offers rugged, reliable, and high-performing I/O modules for interfacing with hardware. Compared to NI’s outdated Fieldpoint modules, the CompactDAQ series outperforms in basic I/O functionality, speed, versatility, size, help resources available, robustness, and lead time for new hardware acquisition. Upgrading from Fieldpoint to CompactDAQ modules can be a rewarding and worthwhile process for the success and longevity of any system. Howeve...

Continue reading →


Glow Sticks, Kickball, and Flip Cup in NYC
Becca Stussman

Glow Sticks, Kickball, and Flip Cup in NYC

This Fall, DMC New York participated in our very first sports team. The league, organized by NYC Social, was a combined Kickball + Flip Cup season. Games were held at a park in Williamsburg, Brooklyn. We were excited that the bases, ball, and players would be lit by glow sticks! Since we have a small office, we joined forces with other small groups to make a full team. The other people on our team were awesome, and being paired with non-DMC teammates was a great way to meet new ...

Continue reading →


DMC New York's Grand Opening Party
Becca Stussman

DMC New York's Grand Opening Party

Although we've been doing business in New York since last spring, we officially celebrated with a grand opening party this October. The event marked the first official DMC New York Party as well as the 20th anniversary of DMC. The night was filled with food, drinks, games, and fun.    We officially opened the New York office with a ribbon cutting ceremony, complete with giant scissors and a champagne toast! Although it took a few tries to actually cut the ribbon, the spirit of th...

Continue reading →


Welcome to DMC, Dinner Theater, and the 1920s
Becca Stussman

Welcome to DMC, Dinner Theater, and the 1920s

For the welcome party of John Michael Fruhlo, Brian Sabino, and myself, DMC took us out in style to Tommy’s Gun Garage, a themed dinner theater set in gangster-ridden, speakeasy-filled, flapper-crazed 1920s Chicago. From the moment we received our first email with details of the event, we knew we were getting into something interesting. We were told that there was a password in order to get into the theater, and that the password was either: 1) DMC Company, or 2) Little Jake Sent Me. ...

Continue reading →


Categories