Tim Jager

06/14/2010

0 Comments

What was the best part of my trip to Charlotte, NC last week? - Watching the Blackhawks Stanley Cup game 6 on a massive screen in the NASCAR hall of fame after the Siemens award ceremony. Very surreal... and totally awesome! Yes, Siemens really kn...

Tim Jager

12/08/2009

0 Comments

Encapsulating your data into custom Data Structures will allow you to Dominate (maybe not the world, but at least your PLC) I'm going to conclude my series on the IEC 61131-3 standard by examining the benefits of Data Structures. (If you misse...

Tim Jager

11/16/2009

2 Comments

If you are a programmer, an OEM, or end user that utilizes IEC 61131-3 compliant PLCs, you should MUST read this article. In the 3rd part of my series on the IEC61131-3 programming standard (you can check out the previous part 1 and part 2), I wil...

Tim Jager

10/20/2009

0 Comments

We had a great time exhibiting at the 2009 National Instruments Technical Symposium on October 20th. Representing DMC, I was joined by two of our LabVIEW certified Architects, Jody Koplo and Leon Grossman, as well as our Technical Director Ken Brey. ...

Tim Jager

10/15/2009

4 Comments

This is part two of my series on the IEC-61131-3 programming standard. Here's a link to Part 1 for those of you that missed it. The IEC61131-3 standard contains 5 different programming languages. This article will give a brief introduction to ...

Tim Jager

09/15/2009

1 Comments

DMC received a record number of visitors to our booth at yesterday's job fair at the University of Illinois. In our quest to hire the best of the best, Jon Carson and I met and spoke with some really promising candidates and managed to collect al...

Tim Jager

09/06/2009

0 Comments

Check out the nifty new code syntax highlighter we've added to the blog.  This will make it much easier for us to post code snippets. Here's a sample c# function that is automatically formatted. Also note the handy tools on the upper rig...

Tim Jager

08/26/2009

2 Comments

Nobody loves catchy numeric buzzwords as much as me. I - E - C - Six - Eleven - Thirty - One - Dash - Three.... It just rolls off the tongue! OK I admit, it's a mouthful, but trust me it's worth knowing about. This is a brief intro to IEC6...

Tim Jager

07/23/2009

1 Comments

We are big fans of the .NET Micro Framework. For anyone who hasn't heard of it, it's a super light version of the .NET Framework that runs on resource-constrained devices embedded systems (read more of our thoughts on .Net Micro Framework). ...

Tim Jager

06/24/2009

1 Comments

I am proud to announce that DMC has achieved Certified Wonderware Integrator Status. To achieve Certified System Integrator Status, DMC has fulfilled the following certification requirements of the Wonderware SI Ecosystem Program: Two or more d...