Blog

Entries for the 'Test and Measurement Automation' Category

Tips and Tricks for Upgrading your NI Compact Fieldpoint to CompactDAQ

National Instruments’ CompactDAQ series offers rugged, reliable, and high-performing I/O modules for interfacing with hardware. Compared to NI’s outdated Fieldpoint modules, the CompactDAQ series outperforms in basic I/O functionality, sp...


DMC Chicago to Host National Instruments Certification Exam

DMC will be hosting a National Instruments certification exam at our Chicago office on February 23. The testing can cover any of the practical exams in the NI lineup, including the Certified LabVIEW Developer and Certified LabVIEW Architect exams. A&...


Open Source J1939 CAN Drivers

DMC has been using the SAE J1939 CAN protocol in LabVIEW applications since 2010. A few years ago, DMC wrote a first generation set of J1939 drivers using the NI-CAN Channel API provided by National Instruments (NI) which was, at the time, a standard...


Troubleshooting NTP with NI Hardware

In order to synchronize DAQ timestamps or time-sensitive processes across devices, you need to establish a common time source to which all devices on a network can synchronize.  Network Time Protocol (NTP) services provide this functionality,...


Meet DMC at Detroit National Instruments IIoT Event on 11/16

DMC will participate in National Instruments' upcoming event on Implementing the Industrial IoT as a featured partner. The event takes place on Thursday, Noveber 16, 2017 at the Marriott Detroit Livonia from 8:30 a.m. to 4 p.m. Event Info T...


NI LabVIEW Part 2: Synchronized Data Acquisition across Distributed FPGA Chassis

In this section, we'll discuss data acquisition using the multiple FPGA chassis architecture outlined in the previous section, NI LabVIEW Part 1: Building Distributed and Synchronized FPGA Applications with Multiple C Series Chassis. If...


Meet DMC at Seattle National Instruments IIoT Event on 10/24

DMC will participate in National Instruments' upcoming event on Implementing the Industrial IoT as a featured partner. The event takes place on Tuesday, October 24, 2017 at the Grand Hyatt Seattle from 8:30 a.m. to 4 p.m. Event Info The&nbs...


DMC to Host National Instruments Exams in 2017

DMC will be hosting two National Instruments certification exam dates at our Chicago office this year. The exams will be held on Thursday, June 22 and Thursday, October 19. The testing can cover any of the practical exams in the NI lineup, including ...


NIWeek 2017 Highlights

Last month, DMC joined hundreds of other National Instruments professionals at the annual NIWeek conference. DMC’s Darren Jones, Jon Carson, Jason Mayes, Jesse Batsche, Peter Rijks, Bill Sowerwine, Nick Aroneseno, Mark Locascio, and Steven Dusi...


Basic LabVIEW UI Control Customization

A common gripe about using LabVIEW is that the user-interface (UI) is not very attractive. Well, that is only true if you do not know how to customize LabVIEW controls to make them look truly modern and visually appealing. Fortunately, t...


Page 3 of 14First   Previous   1  2  [3]  4  5  6  7  8  9  10  Next   Last   
Page 3 of 14