Categories

Application Programming with Yaskawa’s A1000 Inverter Drives

Application Programming with Yaskawa’s A1000 Inverter Drives

I recently had the opportunity to spend a few days at Yaskawa America’s North American headquarters to sit in on an A1000 Application Programming class. As a Yaskawa Solution and Service Provider PLUS, many DMC engineers have extensive application programming experience using Yaskawa’s inverter drives in the industrial workspace. In addition to being a Yaskawa Solution and Service Provider, we have frequently worked closely with Yaskawa’s software development team to aid in firmware and PC tool development. But being relatively new to DMC, it was a great opportunity for me to get a more in depth look at Yaskawa’s latest line of inverter drives.

If you’re not familiar, Yaskawa’s new A1000 variable frequency drive maintains all the abilities of the F7 and G5, but adds even higher levels of performance and several new features – including permanent magnet motor control. The A1000 offers a wide range of power options (from 200-600 V, ¾-250 HP), several different control types, and a variety of communication options that make it an excellent option for both general purpose and high performance industrial applications.

The training course I participated in was designed to teach technicians and engineers the basics needed to incorporate an A1000 VFD into an application. Most of the time was spent doing hands-on programming of the drive for real-world applications such as fans, conveyors, mixers, and winders. By the end of three days I walked away feeling confident I could set a drive up for nearly any application. The capabilities of this drive are really impressive. And with the programming tools Yaskawa provides, setting one up, even for complicated applications, is simple.

Now I’m just looking forward for a chance to put one into action!

Learn more about DMC's Yaskawa PLC programming services.

Comments

Jodie
# Jodie
Great read.
Thanks for sharing.

Jodie
Matt Puskala
# Matt Puskala
Hi Vishal,

You can use the monitors, and if I remember correctly, there is an O group parameter that can allow you to change speed units to RPM. Otherwise, you can use the formula of RPM = 60 * freq in hz / motor poles. This is a synchronous equation and assumes no slip.

Hi Janardhan. I assume you mean control modes like V/f, and Open Loop Vector? These go by different names, sometimes. Vector modes actually monitor the current waveforms going to the motor and use them to determine the phase of the motor at any given time. V/f mode is uses less intelligence - it just outputs a given waveform at a given frequency. Each control mode has a PG mode as well, where it incorporates encoder feedback to help with the control.
janardhan reddy
# janardhan reddy
what is main difference between 3 type of control modes?
explain.....if it possible send a vfd file to janardhan26reddy@gmail.com
vishal
# vishal
How to check RPM ofthe motor using Yaskawa A1000 VFD on its desplay?
vishal
# vishal
How to check the RPM of the motor using Yaskawa A1000 VFD on its desplay?
stewen
Thanks for share.

Post a comment

Name (required)

Email (required)

CAPTCHA image
Enter the code shown above:

Categories

Related Blog Posts